SAS Release Notes 15.0.0 - XMM-Newton
Release Note for SAS 15.0 =========================== Carlos Gabriel & Eduardo Ojero XMM-Newton SOC * Contents . SAS releases covered by this note . URLs . Summary of important changes . New and withdrawn packages . Detailed list of changes between SAS 14.0 and SAS 15.0 * SAS releases covered by this note The version of the SAS installed can be displayed with the command: sasversion This version (15.0.0): xmmsas_20160201_1833 Last public version (14.0.0): xmmsas_20141104_1833 * URLs SAS pages at the XMM-Newton SOC: https://www.cosmos.esa.int/web/xmm-newton/sas XMM-Newton calibration information: https://www.cosmos.esa.int/web/xmm-newton/calibration *Summary of important changes The main improvements of this release are: - Correction of the conversion between celestial and detector coordinate systems. Due to a long-standing error in the task 'attcalc', the Euler Psi angle contained within the boresight calibration file had the wrong sign. In practically all cases the two errors canceled out yielding a correct astrometry reconstruction within SAS. However, direct use of the boresight numbers could result in wrong conversions. This upgrade, affecting several tasks, including attcalc, needs to go together with the new calibration file XMM_BORESIGHT_0026.CCF. The ALGOID mechanism applies here, to prevent SAS users from mixing incompatible SAS and CCF versions. - The new task (ebkgreg) determines the most suitable position of a circle region to get the background estimation of any source in an EPIC PN image. While the task is only working with PN data at the moment, it is thought to be extended to be able to work with MOS data in a foreseeable future. - A new task for fast calculation of upper limits, eupper. Given a position, specified in celestial coordinates, the task calculates the count rate upper limit for any sky image regardless of the instrument. - eboxdetect, the task for slide box source detection, has been upgraded for accepting also input data in detector coordinates. - The metatask for slew data analysis, eslewchain, is able now to produce .png files for each subimage. - RGS responses can be also derived by rgsrmfgen in separated files: a redistribution matrix (RMF) and a corresponding Ancillary Response Function (ARF). The default is however kept with a single response matrix, combining the effects. This version is released in several 64-bit binary versions for Linux and MacOs, but only in one 32-bit binary version (Linux RHEL 5.8). This version however has been tested to run correctly on several other platforms (we provide some libraries where necessary together with the distribution). As always, many other less important improvements and small bug fixes have taken place. 72 tasks have been upgraded all in all, with a total number of 129 sub-version changes. A detailed list follows further below. * New and withdrawn packages NEW: Package ebkgreg: version 0.6.2 [NEW] Package omgrismresp: version 0.1.1 [NEW] WITHDRAWN: - lccorr - rgssuperrmf DELETED: none * Detailed list of changes between SAS 14.0.0 and SAS 15.0.0 A detailed list of all upgraded tasks wrt SAS 14.0.0 follows, the corresponding ChangeLogs are further below:
Package arfgen: version 1.92 [was 1.90.4]
Package attcalc: version 4.34 [was 4.33]
Package cal: version 3.236.3 [was 3.232.1]
Package caloalutils: version 1.109.3 [was 1.109.2]
Package catcorr: version 0.9 [was 0.7]
Package datautils: version 1.14 [was 1.12]
Package dscalc: version 2.7 [was 2.6.2]
Package dsslib: version 5.10 [was 5.8]
Package ebkgreg: version 0.6.2 [NEW]
Package eboxdetect: version 4.25.1 [was 4.23]
Package edetect_chain: version 3.14.1 [was 3.14]
Package eexpmap: version 4.10.1 [was 4.8]
Package eimagecombine: version 0.8 [was 0.5]
Package embadpixfind: version 2.5 [was 2.3]
Package emchain: version 11.19 [was 11.16]
Package emenergy: version 8.7 [was 8.6.2]
Package emldetect: version 6.0.4 [was 6.0.2]
Package emosaicproc: version 0.4 [was 0.3.4]
Package emsaplib: version 2.30 [was 2.29.1]
Package epchain: version 8.75 [was 8.74.4]
Package epevents: version 6.49.10 [was 6.49.8]
Package epframes: version 8.106 [was 8.104]
Package epiclccorr: version 1.20 [was 1.18.3]
Package epicproc: version 2.20 [was 2.17.4]
Package epreject: version 5.16 [was 5.15]
Package epsplitter: version 0.2.8 [was 0.2.7]
Package eptestdata: version 0.12.1 [was 0.12]
Package esas: version 0.9.33 [was 0.9.32]
Package esensmap: version 3.12.1 [was 3.12]
Package esky2det: version 1.17 [was 1.15]
Package eslewchain: version 1.7.1 [was 1.6.1]
Package especget: version 1.44.1 [was 1.39.2]
Package espfilt: version 2.4 [was 2.1.1]
Package hello: version 1.22 [was 1.20]
Package hkauxplot: version 4.7 [was 4.6]
Package imgdisplay: version 1.50 [was 1.48.2]
Package merge: version 0.14 [was 0.13.1]
Package mssllib: version 2.76.1 [was 2.76]
Package oal: version 3.126.1 [was 3.125]
Package omatt: version 2.56.1 [was 2.56]
Package omdetect: version 5.34.1 [was 5.34]
Package omgprep: version 1.9.1 [was 1.9]
Package omgrismresp: version 0.1.1 [NEW]
Package ommosaic: version 2.8.1 [was 2.7.1]
Package omregion: version 2.14.1 [was 2.14]
Package omsource: version 1.25.1 [was 1.25]
Package poscorr3xmm: version 0.2 [was 0.1]
Package ppsslewsumm: version 1.1 [was 1.0.3]
Package preqgti: version 0.8 [was 0.7.2]
Package rawtmlib: version 2.7.2 [was 2.6.8]
Package rgsbadpix: version 2.19 [was 2.18.3]
Package rgsenergy: version 2.1 [was 2.0.4]
Package rgsfluxer: version 1.9.2 [was 1.8.4]
Package rgsimageforbadpixfind: version 0.1 [NEW]
Package rgslccorr: version 0.54 [was 0.53]
Package rgsproc: version 1.34.3 [was 1.31.3]
Package rgsrmfgen: version 1.15.2 [was 1.13.4]
Package sas: version 1.564 [was 1.562]
Package selectlib: version 4.73 [was 4.72.1]
Package specgroup: version 1.6 [was 1.5]
Package srcmatch: version 3.18.1 [was 3.17]
Package ssclib: version 4.30 [was 4.28.1]
Package taskmain: version 1.93 [was 1.92]
Package testccf: version 1.122 [was 1.120.2]
Package tools: version 1.67 [was 1.66]
Package utils: version 1.131 [was 1.130]
Package xcolorcod: version 1.29 [was 1.28]
Package arfgen: version 1.92 [was 1.90.4]
ChangeLog Version 1.92 - 2015-12-04 (RDS) ------------ + (src/BadPixelCorrector.cc) - Uses the NEXT_TO_OFFSET_COLUMN rather than CLOSE_TO_BAD_COLUMN to interpret pixels lying next to offset columns. (SPR-7330) Version 1.91 - 2015-09-01 (RDS) ------------ + (src/PositionUtils.cc) - Use observation time when accessing the boresight matrix (SCR-7265) Version 1.90.4 - 2014-10-14 (RDS) ------------ + (doc/arfgen_description.tex) - Addition on XMMEA_EM (SPR-7224)
Package attcalc: version 4.34 [was 4.33]
ChangeLog Version 4.34 - 2015-08-25 (RDS) --------------------------------- + (src/attcalc_mod.f90): Changed the use of the psi euler angle such that it subtracts rather than adds. This is only valid if the BORESIGHT CCF contains PSI with a changed sign (SCR-7265) Version 4.33 - 2012-11-14 (RDS) --------------------------------- + (src/attcalc_mod.f90): Added keyword, calctlmax, which if set true causes the code to calculate TLMIN and TLMAX independently for X and Y from the actual X,Y event positions. (SPR-6769)
Package cal: version 3.236.3 [was 3.232.1]
ChangeLog Version 3.236.3 - 2016-02-01 (RDS) --------------- + (src/GeometryDataServer.cc) - Remove debug causing problem in psfgen test (SPR-7341) Version 3.236.2 - 2016-01-21 (RDS) --------------- + (f90/CalF90cxxGlue.cc) - Fix for time-dependence in boresight (SPR-7337) Version 3.236.1 - 2015-12-14 (RDS) --------------- + (src/EnergyCorrector.cc) - Fixes for algoid=5 Version 3.236 - 2015-12-10 (RDS) --------------- + (src/EnergyCorrector.cc/h - Computes long_term_CTI from a table stored in CCF (algoid=5). (SPR-7315) Version 3.235 - 2015-11-18 (RDS) --------------- + (src/Boresight.cc - Made compatible with algoid=1 (f90test/caltest_emos.f90) only. The old CCF will now result in an error message. (SCR-7265) Version 3.234 - 2015-09-01 (RDS) --------------- + (src/Boresight.h) - Gave public C++ access to updateBoresight method (SCR-7265) Version 3.233 - 2015-03-11 (RDS) --------------- + (src/EnergyCorrector.cc/h - Added support for BURST mode RDPHA corrections (SCR-7280) Version 3.232.1 - 2014-09-17 (RDS) --------------- + (src/Redistribution.cc, src/SpecQualityServer.cc) - Removed DEBUG
Package caloalutils: version 1.109.3 [was 1.109.2]
ChangeLog Version 1.109.3 - 2014-11-13 (EO) --------------- + src/xmm.h: stime.h replaced by stime_c.h after it has been renamed in package utils. Version 1.109.2 - 2014-06-09 (EO) --------------- + src/xmm_c.cc: By mistake this fchange was not done in previous version. made now.
Package catcorr: version 0.9 [was 0.7]
ChangeLog Version 0.9 - 2015-11-27 (RDS) ---------------------- - Fixed problem with building documentation (SPR-7327) Version 0.8 - 2014-12-16 (RDS) ---------------------- - Sends summary information to diagnostic file if requested (SPR-7259) Version 0.7 - 2012-12-14 (CGP/LUX) ---------------------- - New parameter astcorr to provide temporary astrometric corrections
Package datautils: version 1.14 [was 1.12]
ChangeLog
Version 1.14 - 2015-11-09 (RDS)
-----------
+ DEPEND - Added ssclib dependency
Version 1.13 - 2015-08-25 (RDS)
-----------
+ (src/SscWcsConvertor.cc/h, - Added a C++ interface to the ssclib
ssclib_glue.f90, coordinate conversion routines.
WCSConvertor.cc/h,
ArrayPixelIterator.cc/h, Added method valueAt(index) to get
ImagePixelIterator.cc/h, a fast pixel value without setting
TablePixelIterator.cc/h) all the coordinate transformations
(SCR-7265)
Version 1.12 - 2012-01-25 (RDS)
-----------
+ (src/WCSConvertor.cc/h - changed crpix input values
from unsigned to signed integers
(SPR-6684)
Package dscalc: version 2.7 [was 2.6.2]
ChangeLog Version 2.7 - 2015-09-22 (AI) ----------- + Bug related to the timesys convertion of UTC and TT/TDB times fixed. SOC-SPR-2853 fixed. Version 2.6.2 - 2012-05-23 (AI) ----------- + Added comment to the PHASEXP and PERIOD attributes.
Package dsslib: version 5.10 [was 5.8]
ChangeLog Version 5.10 - 2015-02-13 (AI) ----------- + New timestamps for DssLexer.l and DssParser.y files Version 5.9 - 2014-12-04 (AI) ----------- + Doc modified to include "_" simbol in latex. Version 5.8 - 2014-04-15 (AI) ----------- + gcc4.8.2 portability changes.
Package ebkgreg: version 0.6.2 [NEW]
ChangeLog Version 0.6.2 - 2015-12-21 (JVP) ----------- + No background region is produced if the background extraction radius is less than 3 pixels Version 0.6.1 - 2015-12-17 (RDS) ----------- + test/ebkgreg_test_pn - changed test for Boresight_0015.CCF Version 0.6 - 2015-09-02 (JVP) ----------- + Changed DISTRIBUTION into world Version 0.5 - 2015-08-21 (JVP) ----------- + Distance between edges of (source region) and (background region) dr0 = = Source extraction radius, but clamp to 12 arcsec < dr0 < 40 arcsec. Version 0.4 - 2015-08-13 (JVP) ----------- + In the multiple-sources case from an input Source List the extraction region radius for each source can be obtained from: - Counts and off-axis information from LOOKUP.FITS table or - Directly from the input source list as SRC_RAD column + Documentation updated Version 0.3 - 2015-08-11 (JVP) ----------- + Open/close dataset correction + GUI layout update Version 0.2 - 2015-08-04 (JVP) ----------- + Input as Source List file. Background region estimation to the same input file in extra columns (BKG_*). + Input as individual source from the command line. Background region estimation to stdout. + Documentation. Version 0.1 - 2015-06-16 (JVP) ----------- + Original and Development version + Directory structure created by pkgmaker.
Package eboxdetect: version 4.25.1 [was 4.23]
ChangeLog Version 4.25.1 - 2015-10-01 (IT) -------------- + Input data in detector coordinates: Use CDELT1L, CDELT2L header keywords instead of CDELT1, CDELT2 in order to determine the pixel size. For pn and MOS images in detector coordinates, CDELT1/2 have different units. Version 4.25 - 2015-08-21 (IT) -------------- + Allow input data in detector coordinates (SCR 7289). The coordinate system is determined from the keywords CTYPE1/2 (new arguments to the subroutine co_image): detector coordinates, if DETX/Y. No PSF correction is performed in this case. Detector coordinates of the detections are written to new DETX/DETY columns in the output source list (only!) for input images in detector coordinates. Note: Position errors are not converted into detector coordinates. If required, users can derive them from the X_IMA_ERR, Y_IMA_ERR columns. + Documentation updated. Version 4.24 - 2015-03-31 (IT) -------------- + new parameter "obsmode" to distinguish between pointing and slew-mode data (SCR 7279). Default: pointing. + eboxdetect_mod.f90: use a flat kernel + eboxdetect_mod.f90: Improved detection of faint extended sources. subroutine msrbkg: Calculate preliminary equivalent likelihoods of the candidate sources. subroutine match: If irun (i.e.: ncom) > 1, check whether a newly detected candidate has a counterpart in the previous version of the source list AND (new:) whether the equivalent likelihood of the counterpart is above the detection threshold likemin. A previous detection with a likelihood below likemin can be overwritten by a new one now. Otherwise, it might be removed from the final source list because of its low detection likelihood, and faint extended sources might be missed. + documentation updated Version 4.23 - 2014-08-28 (IT) -------------- + DEPEND: updated to emldetect-6.0 + edetect_io_box.f90, documentation: fixed typo in error messages. + edetect_io_box.f90: changed syntax of cp_head to be consistent with other source-detections tasks (call setAttributes). No effects on eboxdetect output.
Package edetect_chain: version 3.14.1 [was 3.14]
ChangeLog Version 3.14.1 - 2015-02-19 (IT) -------------- + Documentation: Updated default values of 10 parameters (cf. SPR-7275); added missing constraints of four parameters. Version 3.14 - 2014-08-28 (IT) -------------- + DEPEND: updated to emldetect-6.0 + Updated documentation to 3XMM.
Package eexpmap: version 4.10.1 [was 4.8]
ChangeLog Version 4.10.1 - 2015-12-16 (RDS) ------------ + test/expo_refima.fits.gz: Changed the template test exposure map back to give the same result as the calculation with the old boresight file (XMM_BORESIGHT_0015) Version 4.10 - 2015-11-30 (RDS) ------------ + test/expo_refima.fits.gz: Upgraded the template test exposure map to give the same result as the calculation with the new boresight file (XMM_BORESIGHT_0026) Version 4.9 - 2015-08-25 (RDS) ------------ + src/eexpmap_mod.f90: Modified the use of the boresight PSI angle to subtract rather than add. This is only valid if the value in the CCF has a changed sign. (SCR-7265) Version 4.8 - 2014-06-10 (IT) ------------ + edetect_io_exp.f90: copy full dataset and array headers of the input image to the exposure map (instead of a list of selected keywords) -> Fixes SPR-7129 and makes physical coordinates available to ds9. (copy of version 4.6.6)
Package eimagecombine: version 0.8 [was 0.5]
ChangeLog Version 0.8 - 2012-12-08 (nclerc) --------------------------------- - add consistency check on SUBMODE for each image/exposure/band Version 0.7 - 2015-06-23 (nclerc) --------------------------------- - re-upload due to new permissions in folders and mistake in previous commit Version 0.6 - 2015-02-04 (nclerc) --------------------------------- - (src/eimagecombine): expr bugfix (Mac) Version 0.5 - 2014-09-02 (rsturm) --------------------------------- - (src/eimagecombine): sed bugfix (Mac)
Package embadpixfind: version 2.5 [was 2.3]
ChangeLog Version 2.5 - 2015-11-20 (AI) ----------- - Type declaration for "node" and "tabname" variables Version 2.4 - 2015-11-18 (AI) ----------- - New compatibility with RGS images to detect hot pixels and columns Version 2.3 - 2009-01-08 (JB) ----------- - mu and mu2 variables were not initialized in findBadPix. Failed with F95 5.1 - Improve gradient correction to dispersion estimate near the borders - Consider that bright pixels declared in CCF are bad by default - Add ignoreccfbright parameter to allow testing them anyway
Package emchain: version 11.19 [was 11.16]
ChangeLog Version 11.19 - 2015-12-09 (AI) ------------- - Documentation updated: MOS event screening criteria paragraph removed. SOC-SPR-7225 closed Version 11.18 - 2014-10-31 (JB) ------------- - Updated test harness for emtaglenoise. Version 11.17 - 2010-10-08 (JB) ------------- - Added call to emtaglenoise. Version 11.16 - 2009-06-18 (HC) ------------- - Updated reference event list for test harness to work with upgraded test CCF.
Package emenergy: version 8.7 [was 8.6.2]
ChangeLog Version 8.7 - 2015-05-13 (AI) ------------- + Documentation updated. SOC-SPR-7226 fixed Version 8.6.2 - 2009-06-08 (AI) ------------- + test files events.ref and bkgmap.ref regenerated using the new EMOS LINCOORD version 18. Fixes SOC-SPR-6545
Package emldetect: version 6.0.4 [was 6.0.2]
ChangeLog Version 6.0.4 - 2016-01-25 (IT) ------------ + Documentation: Expanded description of fluxes and ECFs (SPR-7306). Re-structured the description section. Version 6.0.3 - 2015-08-25 (IT) ------------ + Changed file permissions. Version 6.0.2 - 2014-10-24 (IT) ------------ + Documentation: corrected & updated section on position errors (SPR-7244)
Package emosaicproc: version 0.4 [was 0.3.4]
ChangeLog
Version 0.4 - 2015-12-04 (AI)
-----------
+ Inconsistent order of input images sets and pi ranges fixed in the the call
to emldetect and eboxdetect. (SOC-SPR-7290) closed
Version 0.3.4 - 2014-10-14 (JVP)
-----------
+ Previous versions (0.3.2 and 0.3.3) rejected in DELIVERY_LOG.
User Jose V Perea was not allowed for deliveries.
Fixed: User included in GnuPG keyring.
Package emsaplib: version 2.30 [was 2.29.1]
ChangeLog Version 2.30 - 2015-11-18 (AI) ------------ + New compatibility with RGS images to detect hot pixels and columns Version 2.29.1 - 2014-10-21 (RDS) ------------ + src/CalF90cxxGlue.cc - Fixed problem with dope conversion in CAL_mosPhaBuild (SPR-7090)
Package epchain: version 8.75 [was 8.74.4]
ChangeLog Version 8.75 - 2015-04-01 (MJF) ------------------------------- - (src/epchain): allow input list of offset maps (instead of the ones identified by the OAL, or sometimes not identified ;-) This is useful in the case when the offset maps were dumped before or after the observation with different ObsID (e.g., early mission data, slews, ...) Moreover, this new feature enables calibration work without changing contents of ODF/SDF data or CCF files. The new interface is used in task "epreject". This is controlled via new boolean parameter "withoffsetlist" (default "N") that takes precendence over "withoffsetmap" if set to "Y": it opens the file specified in new parameter "odilist" and reads the ODI name to be used from there. The input list is an ASCII with 2-digit CCD number followed by a blank and then the path to the offset map for that CCD (there can be more than one offset map in that file so that the input file can be used for the whole observation processing; only the first entry for a particular CCD is used; the order does not matter). (SCR-7284) - (config/epchain.*): as above - (doc/epchain_description.tex): as above - (DEPEND): needs `epreject-5.16' Version 8.74.5 - 2014-11-11 (MJF) --------------------------------- - (src/epchain): uniquely convert booleans to 0/1 Version 8.74.4 - 2014-11-04 (MJF) --------------------------------- - (src/epchain): added new parameter "withdefaultcal" (default "Y") that uses default values properly for each of the instrument modes, and thus overwriting the mode-independent" constituent task parameter defaults: withrdpha (epevents), withxrlcorrection (epreject), runepreject, runepfast (SCR-7254) - (config/epchain.*): as above - (doc/epchain_description.tex): as above
Package epevents: version 6.49.10 [was 6.49.8]
ChangeLog Version 6.49.10 - 2016-01-24 (MJF) ---------------------------------- - (src/epevents_mod.f90): complete change to avoid I*1 overflow to allow compilation with NAG-6.0 compiler on Mac-OSX Version 6.49.9 - 2016-01-20 (MJF) --------------------------------- - (src/epevents_mod.f90): minor change to avoid (intentional) I*1 overflow to allow compilation with NAG-6.0 compiler on Mac-OSX - (src/epevents_mod.f90): remove warning related to "ctilongtermsoft=Y" (SCR-7194) Version 6.49.8 - 2014-09-29 (MJF) --------------------------------- - (config/epevents.par): changed default "ctilongtermsoft=Y" (SCR-7194) - (doc/epevents_description.tex): as above
Package epframes: version 8.106 [was 8.104]
ChangeLog Version 8.106 - 2015-10-14 (RDS) -------------------------------- - (doc/epframes_description.tex): improved description of JUMP tolerance (SPR-7056) Version 8.105 - 2015-05-28 (MJF) -------------------------------- - (src/epframes_mod.f90): write not only SRCRAWX, SRCRAWY, but also the corresponding CCDSRC to FITS header (need not always to be central CCD 4) Version 8.104 - 2014-06-02 (MJF) -------------------------------- - (src/epframes_mod.f90): read also column FD130 from PNPMH1 file (FILTER), and write it to keyword "derived filter" FD130
Package epiclccorr: version 1.20 [was 1.18.3]
ChangeLog Version 1.20 - 2015-12-09 (AI) ------------ + Parameter "extendedsource" set you "yes" in the arfgen background call. Version 1.19 - 2014-12-12 (AI) ------------ + Seg fault when the first frame falls in two bins fixed. Version 1.18.3 - 2014-09-29 (AI) ------------ + extra parameters added to arfgen call. Related to SOC-SPR-7119
Package epicproc: version 2.20 [was 2.17.4]
ChangeLog Version 2.20 - 2015-12-09 (AI) -------------- + mos doc updated (SOC-SPR-7100) Version 2.19 - 2015-12-01 (AI) -------------- + doc updated (SOC-SPR-7264) Version 2.18 - 2014-11-17 (AI) -------------- + epproc layout file changed Version 2.17.4 - 2014-11-02 (AI) -------------- + Doc updated
Package epreject: version 5.16 [was 5.15]
ChangeLog Version 5.16 - 2015-03-24 (MJF) ------------------------------- - (src/epreject_mod.f90): allow input list of offset maps (instead of the ones identified by the OAL, or sometimes not identified ;-) This is useful in the case when the offset maps were dumped before or after the observation with different ObsID (e.g., early mission data, slews, ...) Moreover, this new feature enables calibration work without changing contents of ODF/SDF data or CCF files. This is controlled via new boolean parameter "withoffsetlist" (default "N") that takes precedence over "withoffsetmap" if set to "Y": it opens the file specified in new parameter "odilist" and reads the ODI name to be used from there. The input list is an ASCII with 2-digit CCD number followed by a blank and then the path to the offset map for that CCD (there can be more than one offset map in that file so that the input file can be used for the whole observation processing; only the first entry for a particular CCD is used; the order does not matter). (SOC/SAS-SCR-7284) - (config/epreject.*): as above - (doc/epreject_description.tex): as above Version 5.15 - 2014-05-02 (MJF) ------------------------------- - (src/epreject_mod.f90): write boolean keyword "OFSTCOR4" whether calibration parameters for offset correction have been available (SOC/SAS-SCR-7199)
Package epsplitter: version 0.2.8 [was 0.2.7]
ChangeLog Version 0.2.8 - 2015-11-10 (EO & RS) ------------- + Added missing required datautils to DEPEND file. Version 0.2.7 - 2011-02-17 (AI) ------------- + Bug deleting ColumnData pointer fixed
Package eptestdata: version 0.12.1 [was 0.12]
ChangeLog Version 0.12.1 - 2015-12-21 (rds) -------------------------------------- - (epic): changed boresight to 0015_SCISIM.CCF in P0601211301_ccf.cif - this is to allow the eimageget test to work correctly Version 0.12 - 2014-06-02 (mjf/rsturm) -------------------------------------- - (epic): reduced size of files for tasks eimageget and eimagecombine
Package esas: version 0.9.33 [was 0.9.32]
ChangeLog
Version 0.9.33 - 2016-01-10 (BP)
+ Removed CCD4 post-CCD3-loss if statements (selection expressions) from mos-spectra.
+ Fixed bug in conv\_reg (erroneous single quote found in select expr).
+ Deprecated tasks esprep\_mosaic and esprep\_mosaic_time. The functionality of these
are now done in the PPS with the subpointings in mosaic mode.
+ Fixed bug in merge\_comp\_xmm for rectangular matrices.
Version 0.9.32 - 2014-10-27 (BP)
+ Added parameter checkfov=no to esky2det call within conv\_reg.
+ Changed "mv" to "cp" in perl tasks for HERA and TREND usage.
+ Added lines to perl task clean to remove originals cp'ed.
Package esensmap: version 3.12.1 [was 3.12]
ChangeLog Version 3.12.1 - 2016-01-25 (IT) ------------ Documentation: Description of parameter mlmin. Parameter limits updated (SPR-7339). Version 3.12 - 2014-07-24 (IT) ------------ + edetect_io_sens.f90: copy full dataset and array headers of the input image to the sensitivity maps (instead of a list of selected keywords). In particular: make physical coordinates available.
Package esky2det: version 1.17 [was 1.15]
ChangeLog Version 1.17 - 2015-08-24 (RDS) ---------------------- + Support for detector coord images in edet2sky Version 1.16 - 2015-07-07 (RDS) ---------------------- + New task edet2sky + documentation Version 1.15 - 2014-04-08 (RDS) ---------------------- + Reference to \CALHANDBOOK in documentation
Package eslewchain: version 1.7.1 [was 1.6.1]
ChangeLog Version 1.7.1 - 2016-01-12 (RDS) ------------------------------- + src/eslewchain - Use ecoordconv rather than eregionanalyse to convert from X/Y to RA/DEC (SPR-7334) Version 1.7 - 2015-05-11 (RDS) ------------------------------- + src/eslewchain - Ignore subimages with no events (SPR-7827). Produce .png files for each subimage (SCR-7305). Version 1.6.1 - 2014-09-25 (RDS) ------------------------------- + src/eslewchain - Chop up the slew using time segments rather than X,Y blocks. This solves several problems with long or complicated slews which may now be processed (SCR-7231)
Package especget: version 1.44.1 [was 1.39.2]
ChangeLog Version 1.44.1 - 2016-01-12 (RDS) ----------- + src/ecoordconv.cc - Added option, pos2eqpos, which config/ecoordconv.par just performs the x/y->ra/dec conversion, avoiding problems where the help point is >90 degs away from the image centre (SPR-7334) Version 1.44 - 2015-11-27 (RDS) ----------- + src/especget.cc - Added the source position params src/RmfMaker.cc/h sourcex, sourcey etc. (SPR-7276) doc/especget_description.tex Version 1.43 - 2015-11-18 (RDS) ----------- + src/ImageRegion.cc/h - Support for lower case region filenames (SPR-7266) + test/ecoordcvtest_mos, /coordcomp - Runs on Ubuntu (SPR-7323) Version 1.42 - 2015-07-22 (RDS) ----------- + src/Eupper.cc/h - Added new task - eupper to provide a fast calculation of an upper limit. This uses the astrometry routines from ssclib. + src/EregionAnalyse.cc - Improved the speed of the calculation of the optimum radius (SPR-7302) + config/eregionanalyse.par - Added a parameter to control whether the source should be centroided or not (SCR-7292) + src/ecoordconv.cc - Uses ssclib coordinate transforms for compatibility with F90 tasks. (SCR-7265) Version 1.41 - 2014-12-12 (RDS) ----------- + src/especget.cc - Added parameter - a0removefiles - to control whether files are removed if ARF<=0 (SPR-7218) Version 1.40 - 2014-12-02 (RDS) ----------- + src/especget.cc - Solved problem with #XMMEA macro + src/etimeget.cc selection (SPR-7258) Version 1.39.2 - 2014-10-16 (RDS) -------------- + src/FindBestRmfName.h - Finds rmf name using the epoch dependence of EPIC-pn (SPR-7241)
Package espfilt: version 2.4 [was 2.1.1]
ChangeLog Version 2.4 - 2015-11-17 (BHP) + Fixed laTeX bug causing make doc failure. Version 2.3 - 2015-05-12 (AI) + corner option in method parameter removed. + varibale nchan_flc initialized in clean_lc subroutine to avoid out of memory errors in some OS. Version 2.1.1 - 2014-10-24 (RDS) + Copy of 2.2
Package hello: version 1.22 [was 1.20]
ChangeLog Version 1.22 - 2015-12-10 (RS & EO) ------------ + No changes to code. Just testing git. Version 1.21 - 2015-12-03 (EO) ------------ + No changes to code. Used to test the changes made to upload system. Version 1.20 - 2014-04-25 (EO) ------------ + No changes to code, just simply testing make upload locally.
Package hkauxplot: version 4.7 [was 4.6]
ChangeLog Version 4.7 - 2015-11-17 (BHP) - Fixed laTeX bug that caused make doc failure on build. Version 4.6 - 2014-05-06 (BHP) - Update to test harness to accommodate testprods - Fixed bug in making output device XW. - Reconciliation of dates in docs. - Reconciled output device logic (in code and params).
Package imgdisplay: version 1.50 [was 1.48.2]
ChangeLog Version 1.50 - 2014-12-04 (AI) ------------ + Fixed a problem related to the region property (SOURCE or BACKGROUND / INCLUDE or EXCLUDED) that Ds9.cc sent to ds9 through xpa connectivity. SOC-SRP-7257 fixed Version 1.49 - 2014-11-20 (AI) ------------ + (Ds9.h) Wrong initialization of a bool variable with a string. SOC-SPR-7255 fixed Version 1.48.2 - 2009-04-02 (AI) ------------ + (Ds9.cc) fk5 coordinate system added to be used with multixmmselect
Package merge: version 0.14 [was 0.13.1]
ChangeLog Version 0.14 - 2015-05-13 (RDS) ------------------------------- + (src/merge_mod.f90): Remove useless debug line Version 0.13.1 - 2012-05-17 (RDS) ------------------------------- + (src/merge_mod.f90): Refuses to merge events from different observations unless a new parameter "mergedifferentobs" is set to "yes" by the user (SPR-6728)
Package mssllib: version 2.76.1 [was 2.76]
ChangeLog
Version 2.76.1 - 2014-05-22 (AI)
------------
+(src/omphotometry_mod.f90) use modules reordering to avoid error
with NAG fortran compiler 6.2
Version 2.76 - 2014-05-22 (AI)
------------
+(src/omsourceparam_mod.f90) Derived type modified acoordingly
to match c++ struct variable order.
Package oal: version 3.126.1 [was 3.125]
ChangeLog Version 3.126.1 - 2015-12-17 (RDS) --------------- + test/myboresight.ccf - changed to ALGOID=1 for CAL compatibility Version 3.126 - 2015-09-29 (AI) --------------- + (TimeTags.cc) In RGS toObt method, we have added an extra check for wrap-arounds of the EOSCOARS values in the AUX file. Version 3.125 - 2014-04-15 (AI) --------------- + gcc4.8.2 compatibility changes
Package omatt: version 2.56.1 [was 2.56]
ChangeLog Version 2.56.1 - 2016-01-12 (AI) ------------------------------ + (src/omrotation_mod.f90) use modules reordering to avoid error with NAG fortran compiler 6.2 Version 2.56 - 2013-10-04 (VNY) ------------------------------ +(src/omastromcorrect_mod.f90) Accelerated source matching for the large number of detected sources (>2000) by reducing the magnitude range of the mathced sources.
Package omdetect: version 5.34.1 [was 5.34]
ChangeLog Version 5.34.1 - 2016-01-12 (AI) ------------------------------- + (src/sourceanalysis_mod.f90) use modules reordering to avoid error with NAG fortran compiler 6.2 Version 5.34 - 2014-03-19 (VNY) ------------------------------- +src/omdetect_mod.f90: the calculation of the coincidence-loss corrected error bars is modified by using the postulation of the s/n ratio being the same for the corrected count rates as for the raw count rates; Setting to NULL the corrected count rates for the sources with raw+nkg count rate >0.97 counts per frame.
Package omgprep: version 1.9.1 [was 1.9]
ChangeLog Version 1.9.1 - 2016-01-12 (AI) ------------- + (src/utility_mod.f90) Memory allocation error using NAG fortran 6.2 fixed. Version 1.9 - 2009-04-06 (VNY) (+src/background_mod.f90) make it possible to deal with two types of data in the quality map: int8 or int16 in order to adjust this task to the recent changes in omdetect.
Package omgrismresp: version 0.1.1 [NEW]
ChangeLog Version 0.1.1 - 2014-11-27 ---------------------------- Modified DEPEND Version 0.1 - 2014-11-19 ---------------------------- Original Version
Package ommosaic: version 2.8.1 [was 2.7.1]
ChangeLog Version 2.8.1 - 2015-12-22 (RDS) ------------------------------- +(src/omwcs.cc) calculate the deadtime fraction from the MAXIMUM frame time of the input images (SPR-7299) Version 2.8 - 2015-11-26 (RDS) ------------------------------- +(src/omwcs.cc) calculate the deadtime fraction from the frametime, rather than reading it from the file header. (SPR-7299) Version 2.7.1 - 2014-04-22 (EC) ------------------------------- - additional cleaning of generated files in test/
Package omregion: version 2.14.1 [was 2.14]
ChangeLog Version 2.14.1 - 2016-01-12 (AI) ------------------------------ +(src/omregion_mod.f90) New NAGFor compiler 6.2 throws an Overflow exception for some integer values. To solve this problem we have added two new null Int8 and Int16 definitions. Version 2.14 - 2012-11-30 (VNY) ------------------------------ +(src/omregion_mod.f90): Added the capability of picking up the columns from the combined and merged source lists produced by the tasks omsrclistcomb and ommergelists
Package omsource: version 1.25.1 [was 1.25]
ChangeLog Version 1.25.1 - 2016-01-12 (AI) ------------- + (src/omsource_old.f90) use modules reordering to avoid error with NAG fortran compiler 6.2 Version 1.25 - 2014-05-22 (AI) ------------- + (src/OmSourceParameters.h) c++ struct refractoring to avoid seg faults in 64bit platforms + (src/OmSourcePhotometryDlg.cc) Utilization of QString vector instead of QString array to avoid 64bit crashes.
Package poscorr3xmm: version 0.2 [was 0.1]
ChangeLog Version 0.2 - 2015-11-17 (RDS) ------------------------------ Uses observation date for the boresight calculation (SPR-7317) Version 0.1 - 2013-04-26 (RDS) ------------------------------ New name for the ellbetacorr task
Package ppsslewsumm: version 1.1 [was 1.0.3]
ChangeLog
Version 1.1 - 2014-10-23 (EO&AI)
-------------
+ (Omindex.h & Rgsindex.h & Obsindex.h) Bug related to the less than operator
method fixed. The logic in this operator causes a segmentation fault in sort
method when the same element of the class was compared.
+ (Osw_id.h) Logic in the less than operator changed.
Version 1.0.3 - 2014-05-06 (EO)
-------------
+ src/Degrees.h: Added #include to make gcc 4.8.2 happy.
Package preqgti: version 0.8 [was 0.7.2]
ChangeLog Version 0.8 - 2015-02-10 (AI) ----------- + New condition added to take into account attitudes without P, C or O identifiers. Version 0.7.2 - 2014-10-02 (AI) ----------- + "delete" table statement replaced with dataSetServer close statement.
Package rawtmlib: version 2.7.2 [was 2.6.8]
ChangeLog
Version 2.7.2 - 2016-01-26 (JAQ)
-----------
+ CCRXXX fix NCTRSProcessor constructor
Version 2.7.1 - 2016-01-26 (JAQ)
-----------
+ CCRXXX fix NCTRSProcessor constructor
Version 2.7 - 2016-01-25 (JAQ)
-----------
+ CCRXXX new implementation of atennas properties
Version 2.6.9 - 2015-07-28 (JAQ)
-----------
+ CCR2312 Addition of AUYS01
Version 2.6.8 - 2014-10-29 (JAQ)
-----------
+ SPR7245 Addition of DSS15 and DSS24
Package rgsbadpix: version 2.19 [was 2.18.3]
ChangeLog
Version 2.19 - 2015-11-18 (AI)
--------------
+ embadpixfind optional usage to filter hot pixel and columns
+ New parameter to chose the badpixel filter algorithm (SOC-SPR-6862)
Version 2.18.3 - 2009-09-03 (AI)
--------------
+ Fixes to make rgsbadpix gcc-4.3 compliant
Package rgsenergy: version 2.1 [was 2.0.4]
ChangeLog Version 2.1 - 2015-05-13 (AI) ------------- + param withdiagoffset default value changed to "yes" Version 2.0.4 - 2006-05-25 (CG) ------------- + Recognition of Spectroscopy 1x1, and consequent avoidance of Pixel-to-Pixel subtraction (SPR 2682)
Package rgsfluxer: version 1.9.2 [was 1.8.4]
ChangeLog Version 1.9.2 - 2016-01-29 (AI) ------------- + Doc updated. Version 1.9.1 - 2015-12-22 (AI) ------------- + New parameters "witharffile" and "arf" Version 1.9 - 2015-12-11 (AI) ------------- + new rgsfluxer implementation to take into account ARF files Version 1.8.4 - 2013-09-02 (AI) ------------- + Doc updated.
Package rgsimageforbadpixfind: version 0.1 [NEW]
ChangeLog
Version 0.1 - 2015-11-18 (AI)
-----------
+ First version
Package rgslccorr: version 0.54 [was 0.53]
ChangeLog Version 0.54 - 2015-05-12 (AI) ------------- + Brackground rate and error column added to the background corrected light curve. + Obs id, exp id, ra_obj and dec_obj keywords added to the output file to make it compatible with elcplot. + error when filtering with single CCDs fixed. Version 0.52.1 - 2012-06-08 (AI) ------------- + Attribute keyword HDUCLAS2 changed to NET in case bkg subtraction is applied. Version 0.52 - 2010-07-21 (AI) ------------- + Bug fixed when only order 2 is selected and the wavelength filtering is enabled. SOC-SPR-6623 fixed Version 0.51.4 - 2009-09-02 (AI) ------------- + Fixes to make rgslccorr gcc-4.3 compliant. Version 0.51.3 - 2009-05-29 (AI) ------------- + Error producing empty bkg light curves when "withbkgsubtraction" is desabled fixed. SOC-SPR-6539 fixed Version 0.51.2 - 2009-05-22 (AI) ------------- + Bug related to ccd selection and SOC-SPR-6535 fixed. Version 0.51.1 - 2009-05-21 (AI) ------------- + Bug in rgslccorr.cc expression creation fixed. SOC-SPR-6535 fixed Version 0.51 - 2009-04-23 (AI) ------------- + doc updated Version 0.5 - 2009-04-23 (AI) ------------- + Selection in energy implemented Version 0.4 - 2009-04-22 (AI) ------------- + New CCD selection and wavelength filtering functionalities added. + New file for background light curve created + withbackground subtraction parameter added + withccdselection parameter added + withwavelength filtering parameter added + doc updated Version 0.3 - 2009-02-02 (AI) ------------- + (src/Lightcurve.cc) New background count rate, error background count rate, source counts, background counts and fracexp columns added to the output file. Weigthed mean BACKSCALE keyword added. (SOC-SCR-270) Version 0.2.2 - 2008-06-17 (AI) ------------- + (config/rgslccorr.info) Set VISIBLE to yes Version 0.2.1 - 2007-10-31 (AI) ------------- + (src/rgslccorr.cc) bug related to order selection fixed. Version 0.2 - 2007-10-30 (AI) ----------- + (src/LightCurve.cc) bug related to binzise values similar to RGS frame time resolution fixed. SOC-SPR-2731 Closed. Version 0.1.1 - 2007-07-04 (AI) ------------- + First experimental version. + Dead time correction applied. + Area scale correction applied. Version 0.1 - 2007-05-25 (AI) ----------- + First skeleton version for development of rgs light curve correction.
Package rgsproc: version 1.34.3 [was 1.31.3]
ChangeLog
Version 1.34.3 - 2016-01-13 (AI)
------------
+ The test Boresight ccf file was corrupted because of a
git upload problem. It has been replaced by a correct one.
Version 1.34.2 - 2015-12-22 (AI)
------------
+ Update in rgsfluxser call to deal with separated RMF and ARF
files.
Version 1.34.1 - 2015-12-17 (RDS)
------------
+ test/XMM_BORESIGHT_0000.CCF - changed to ALGOID=1
Version 1.34 - 2015-11-20 (AI)
------------
+ New parameter "includeinputfifofull" to disable
INPUT FIFO FULL HK filtering in hkgtigen
+ Parameter files updated to include the parameters included in ver
1.33
Version 1.33 - 2015-11-20 (AI)
------------
+ new parameter "embadpixalgo" to enable embadpixfind algorithm in rgsbadpix
Version 1.32 - 2015-07-10 (AI)
------------
+ New parameter "witharffiles" added to rgsrmfgen (fluxing stage).
+ Doc updated.
Version 1.31.3 - 2014-09-29 (AI)
------------
+ rgsproc harness test modified.
Package rgsrmfgen: version 1.15.2 [was 1.13.4]
ChangeLog Version 1.15.2 - 2016-01-29 (AI) ----------- + Doc updated. Version 1.15.1 - 2015-12-16 (AI) ----------- + Bug in LSF calculation when "witharffile" is set to yes fixed. SOC-SPR-7331 fixed Version 1.15 - 2015-07-15 (AI) ----------- + Temporal cal rgs grating methods removed. Version 1.14 - 2015-07-10 (AI) ----------- + This version introduces the ARF + RMF separation. + New parameters "witharffile" and "arfset" to enable the response file separation. + Doc updated Version 1.13.4 - 2013-04-23 (AI) ----------- + (src/calib.cc) Variable beta bin width value for LSF calculations + (src/rgsrmfgen.cc) betaEfficiency calculated for all input energies and using the exact input energy value. + doc updated.
Package sas: version 1.564 [was 1.562]
ChangeLog Version 1.564 - 2015-12-11 (EO) ------------- + configure.in: Cleaned from obsolete code. + Make.include.in: Changed sed field separators from / to ? to fix the problem of replacing -sasperl- by $$PT, given that $$PT is a path and includes / as directory separators. Version 1.563 - 2015-12-02 (EO) ------------- + AKA: 14.0.0 -> 15.0.0 + configure.in: - Updated copyright dates to 1996-2016. - Removed/commented out checks for unsupported Solaris and OSF. - Review variables included from acconfig.h to produce config.h.in. - Removed/commented out obsolete checks for mysql++ and CERN. - Removed obsolete checking for CERN. + Make.include.in: - Removed obsolete support for CERN, mysql, sfftw and dfftw - Changed the exit 1 by continue in dvipdf execution to avoid breaking the make doc target before processing html and producing labels.pl, e.g. in cal, which is used by many packages. - Fixed several typos in target commit for $$branch variable. - Added to git commit message the package version (pkgversion): "$$pkg-$$pkgversion: Committed through make", to improve readability when doing "git log"or "git status" for packages committed by developers. - Target "upload" modifed: = Variable needstash is now filtered out for the pkg being uploaded. = "git stash" command changed to "git stash save" with a message that includes the package name and version. = git stash pop operation is now exited if failed. - Target "commit" now includes the pkg version in git commit message. - Removed GNUPERLLDFLAGS variable that was used only on Solaris. - SAS_PERL defined as a function of the PERL value obtained from the configure. This is now used to set -sasperl- in main.pl of package taskmain. As a consequence, all perl tasks use now in the sha-bang the PERL value determined in the configure. There, a new option to set a valid perl is provided by environment variable SAS_PERL. If not defined, the configure looks for valid perl installations in /usr/local/bin, /usr/bin, /sw/bin and /opt/local/bin, the last two only on Darwin. taskmain 1.93 is the first using this mechanism. + bin/evaluatebuild: Major review to fix some important bugs on elapsed time computation. Version 1.562 - 2014-09-24 (EO) ------------- + bin/saslibs: Added libquadmath.so to extralibs because many SAS tasks depend now on it after gcc upgrade to 4.8.2.
Package selectlib: version 4.73 [was 4.72.1]
ChangeLog Version 4.73 - 2015-13-03 (AI) -------------- + src/selcore/VectorFunctors.cc: The inner product of the median spacecraft attitude and the current spacecraft attitude vectors can end up with a value greater than 1.0 (error propagation). If this is the case, the ConeFilterLogic is wrong and the attitude is discared from the GTI returned by attfilter. The result of the inner product is checked and if it is greater than one, the value is reseted to 1.0. Version 4.72.1 - 2014-09-04 (EO) -------------- + src/selcore/SelectParser.cc: Definition of FILE as typedef struct _IO_FILE _FILE in /usr/include/stdio.h conflicts with the usage of it in SelectParser.cc and SelectParser.y when Optimization is used (any) to build the release track. The fix consisted in adding and extra #includein SelectParser.cc.
Package specgroup: version 1.6 [was 1.5]
ChangeLog Version 1.6 - 2015-11-30 (RDS) ------------------------------ + src/Specgroup.cc - Sets file keywords (RESPFILE, docs/specgroup_description.tex ANCRFILE, BACKFILE) to the command line values or leaves them set to the value they had in the input spectrum (SPR-7295) Version 1.5 - 2014-05-07 (RDS) ------------------------------ + src/Specgroup.cc - Added include for gcc 4.82
Package srcmatch: version 3.18.1 [was 3.17]
ChangeLog Version 3.18.1 - 2015-08-19 (IT) ------------ + srcmatch_mod.f90, subroutine srcmatch: increased maximum length of output file names to 1024 (consistent with other source-detection tasks). Version 3.18 - 2015-07-24 (IT) ------------ + srcmatch_io.f90, srcmatch_mod.f90, srcmatch_def.f90: copy columns X_IMA, X_IMA_ERR, Y_IMA, Y_IMA_ERR from an X-ray input to the srcmatch output source list (SCR-7301). Coordinates are copied from one X-ray source list and set to NULL in case of several X-ray input lists. + Documentation updated. Version 3.17.1 - 2014-09-08 (IT) ------------- + srcmatch_io.f90: internal variable "single_inst" should be used for old-style emldetect source lists without summary rows only, but was also set for source lists containing exactly one source. Fixed the if-expression for summary lines.
Package ssclib: version 4.30 [was 4.28.1]
ChangeLog Version 4.30 - 2015-07-28 (RDS) ------------ + (src/wcs_aux.f90) Added routine, readWcsSkyKeys, to read the WCS structure from the REFxxx keywords. Also removed hard error when CUNITs not set and transform is not RA---TAN (SCR-7300) Version 4.29 - 2015-07-07 (RDS) ------------ + (src/coordinate.f90) added routines to convert real format, decimal, RAW coordinates to detector coords rawToDetScalard, rawToDetArrayd, rawToDetVectord (SCR-7300) Version 4.28.1 - 2014-10-28 (AI) ------------ + (test/testsourcecutouts1.f90) clone method called with MODIFY param instead of TEMP
Package taskmain: version 1.93 [was 1.92]
ChangeLog Version 1.93 -2015-12-04 (EO) ------------ + src/main.pl: The sha-bang for perl (/usr/local/bin/perl) is now the variable -sasperl-, which, like other variables in this file which are eclosed by "-", it is replaced at build time by the proper value. -sasperl- is replaced by the PERL determined by the SAS configure. PERL can be either equal to a SAS_PERL value defined by the user or determined among several possible perl installations (/usr/bin/perl, /usr/local/bin/perl, /sw/bin/perl and /opt/local/bin/perl, the last two only valid for Darwin). Version 1.92 - 2014-09-30 (EO) ------------ + src/main.pl: Added support for short common options (-h, -m, -d, etc). Special treatment required for -v.
Package testccf: version 1.122 [was 1.120.2]
ChangeLog Version 1.122 - 2015-12-10 (RDS) --------------- + constituents/XMM_BORESIGHT_0015_SCISIM.CCF: Updated 0015 to ALGOID=1 + constituents/ccf.cif: Set reference to XMM_BORESIGHT_0015_SCISIM.CCF + constituents/scisimccf.cif: Set reference to " " Version 1.121 - 2015-11-18 (RDS) --------------- + constituents/ccf.cif: Set reference to XMM_BORESIGHT_0026.CCF (SCR-7265) Version 1.120.2 - 2014-11-02 (AI) --------------- + constituents/ccf.cif: Set reference to EPN_BUCLOSEDODI_0004.CCF and EPN_TICLOSEDODI_0010.CCF
Package tools: version 1.67 [was 1.66]
ChangeLog Version 1.67 - 2015-09-24 (AI) ------------ + src/xmmtimeconv: Bug fixed in the time conversion from MRT to MJD. SOC-SPR-7308 closed Version 1.66 - 2014-08-27 (AI) ------------ + src/Mafiles updated to include xmmtimeconv
Package utils: version 1.131 [was 1.130]
ChangeLog Version 1.131 - 2015-11-23 (AI) --------------- + Refractoring and renaming of ranlux.f F77 code to rluxgo.f to solve a weird problem in Mac OS X 10.11 (Yosemite) that was unable to generate random numbers producing a segmentation fault. Version 1.130.3 - 2015-11-23 (EO) --------------- + src/STime.cc: Included in LeapSeconds::LeapSeconds(), line 903, missing latest correction already inlcuded in file leadpsec/leapsec.dat.
Package xcolorcod: version 1.29 [was 1.28]
ChangeLog Version 1.29 - 2016-12-01 (AI) ------------ + src/ColorImage.cc: Set to NaN pixels with zero exposure time. (SCR-7314) Version 1.28 - 2014-04-11 (RDS) ------------ + New class ExposureMap added + Each pixel in the color image is now divided by the sum of the exposure map values.