PTR (Post Test Review) @ 11:00
Test Run #3
SFT-FV run in A0 configuration
FUNC VER
Start: 10:30:00
Stop: 11:30:00
ORB LOAD
Start: 13:10:00
Stop:
FUNC_VER
10:45:00 [00:15:00] BELA high priority data via VC2 [ PID 65, PS 15 ]
> Checked
10:59:39 [00:29:39] PHEBUS start of high priority data via VC2 [ PID 71, PS 24 ]
11:24:51 [00:54:51] PHEBUS end of high priority data via VC2
> Checked
> Selective (accumulated data): MGNS (14)
ORB_LOAD
13:11:19 [00:01:19] PHEBUS selective [PID 72, PS 39] + low-prior [VC3: PID 70, PS 23]
13:21:01 [00:11:01] PHEBUS end of selective + low-prior
> Checked
> Selective (accumulated data): PHEBUS (38)
13:22:20 [00:12:20] MERTIS start of hi-prior data [VC2: PID 63, PS 19 ]
13:23:20 [00:13:20] MERTIS end of hi-prior data
> Checked
> Selective (accumulated data): PHEBUS (38), MGNS (17), MERMAG (1)
13:53:03 [00:43:03] SIMBIO: STC start of hi-prior data (255 frames) [ VC2: PID 55, PS 30 ]
13:53:27 [00:43:27] SIMBIO: STC end of hi-prior data
13:54:03 [00:44:03] SIMBIO: VIHI start of hi-prior data (255 frames) [ VC2: PID 56, PS 30 ]
13:56:05 [00:46:05] SIMBIO: VIHI end of hi-prior data
14:10:08 [01:00:08] SIMBIO: STC, VIHI start of hi-prior data (10 frames) via VC2 [ PID 55-56, PS 30 ]
14:10:08 [01:00:08] SIMBIO: HRIC start of hi-prior data (255 frames) via VC2 [ PID 54, PS 30 ]
!! Check order of downlink data (in particular low priority)
> SGS leaves to the airport
14:22:50 [01:12:50] PHEBUS start of selective downlink [VC2: PI 71, PS 24 ] [SDD: PI 72, PS 39 ]
14:28:41 [01:18:41] PHEBUS end of selective downlink
ITL Updates
No updates needed prior to the test.
AI# PHEBUS ITL FUNC VER to be updated after this run for future runs
SSMM Configuration Problems
None
Instrument Problems
-
FUNC PERF
-
SIXS: Event for SIXS-X mode change and telecommand execution acknowledgement.
-
ORB LOAD
-
SIMBIO: HRIC flexible downlink not produced.
Others
None
